Send Us E-Mail

Weekly Special


Manufacturers
Products
Data Collection
Services
Feedback
Contact Us
Quick Links
Search

 

 

 

 

 

iTwinax Twinax Controller
Twinax-over-IP Support For Up to 14 Twinax Devices

Connects Twinax display stations and printers to an AS/400-iSeries Over TCP/IP

PLEASE NOTE The iTwinax Controller is no longer manufacturedThe replacement product is the Xip+ Twinax Controller.  Please click here to be taken to the Xip+ Twinax Controller page. 

Overview

The Affirmative iTwinax Controller connects IBM and IBM compatible Twinax display stations and printers to an AS400-iSeries host via TCP/IP over an Ethernet LAN. The iTwinax is ideal for those who are migrating their AS/400-iSeries to an Ethernet environment.

Affirmative iTwinax Controller map

    Reliable Twinax displays and IPDS/SCS printers can operate in an Ethernet
environment

    Eliminates the need for expensive IBM Twinax Work Station Controllers

    In locations requiring remote access, the I-O 5794ip replaces expensive remote
controllers

    No need for high-priced leased lines or expensive DSU/CSU modems

    No re-cabling – continue to utilize existing Twinax or twisted pair cabling

    Supports up to 56 logical sessions (4 sessions per device)

    Supports up to 4 AS/400-iSeries hosts

    Supports TN5250e, SNA and AnyNet

    Easy to install

Click here for more information on the iTwinax Controller

Specifications

General
    - Attaches up to 14 Twinax displays and printers
    - Star Panel compatible (Maximum 7 devices)
    - Supports up to 4 hosts
    - Allows up to 4 sessions per Twinax address
    - Supports TCP/IP (TN5250e, AnyNet) and SNA
      protocols

• Host Systems and Requirements
    - AS/400-iSeries
    - OS400 V3R2 and newer
    - TCP/IP
    - Telnet services

• Display Stations
    - All 5250 Twinax display stations
    - Display model type is matched to Telnet models:
    5251m11, 5291-1, 5292-2,
    3180-2, 3179-2, 3196-A1, 3477-FG,
    3477-FC (InfoWindow II and Extended Character
    Attributes not supported)

• Printers
    - All 5250 SCS and IPDS Twinax printers
    - TN5250e – host configures all SCS printers as 3812-1
      (IPDS printers are not supported under TN5250e)
    - AnyNet – host recognizes the printer’s model type
    - SNA – host recognizes the printer’s model type

• Data Streams
    - TN5250e, auto configuring local and remote
      connectivity (SCS)
    - AnyNet, auto configuring local and remote connectivity
      (IPDS and SCS)
    - SNA, auto configuring local connectivity (IPDS and
      SCS)

• Network
    - 10/100 BaseT auto-sensing
    - TCP/IP (TN5250e, AnyNet)
    - DHCP client
    - SNA (APPC)
    - Ethernet (IEEE 802.2, 802.3)

• Ports
    - RJ45 for Ethernet
    - DB9 for Twinax Dual-Phase “V”
      Connector (cable included)
    - DB25 parallel for diagnostic printouts

• Approvals
    - Logic Unit – FCC 15, CE
    - Power Supply – UL, CE

• Power Supply
    - Input – 110 to 240 volt AC auto-ranging
    - Output – 5 volt DC, 2.5 amp (shield
      grounded)

• Physical
    - 8-7/16 x 5-9/16 x 1-3/8 inches
      (21.5 x 14.1 x 3.5 cm)
    - 14.3 ounces (405 grams)
    - Temperature range +40 to 100 F
      (5 to 42 C)
    - Relative humidity 10% to 90%, non-
      condensing

Click here for more information on the iTwinax Controller

Additional Features

Features Benefits
Investment Protection When installing an Ethernet LAN that is attached to an AS/400–iSeries, reliable Twinax displays and IPDS/SCS printers can operate in the new Ethernet environment maintaining the usefulness of the equipment
Eliminates the Need for Twinax Work Station Controller A significant saving is realized by installing an I-O 5794ip Twinax Controller instead of an expensive IBM Twinax Work Station Controller
No IBM Remote Controller Required When remote access to an AS/400–iSeries is required, an expensive IBM or IBM compatible remote controller is replaced by an economical I–O 5794ip Controller
No Leased Lines or Expensive Modems When communicating to a remote site, there is no need to spend valuable resources on high-priced leased lines and special modems.
No Re-cabling The I-O 5794ip allows Twinax displays and printers to be connected to existing Twinax or twisted pair cabling eliminating the expense of re-cabling
Multiple Protocols Supports the auto configuring TN5250e and AnyNet for remote locations or SNA for a local attachment
Multiple Host Supports up to 4 hosts
Multiple Sessions Up to 4 sessions per physical device can be configured – Up to 56 logical sessions supported

 

 


|
Home |  | Products |  | Manufacturers |  | Weekly Special |  | Company & Contact Information |  | Feedback |
| Quick Links | | Site Map |  |
Warranty & Support |  | Privacy Policy |  | Shopping |  | Refund Policy |

 


PLEASE CLICK HERE to send us questions or comments about this web site.
Telephone:  USA 1-800-597-2525 / International 1-908-688-8100 / FAX 1-908-688-8160
Copyright©
2023 Twin Data Corporation