|
Turn
Your Zebra and Eltron Label Printers into Full Function
iSeries / zSeries
IPDS Matrix Printers
PLEASE
NOTE: The
EBOX-Z is a discontinued product. The
alternative to an EBOX-Z connected to a Zebra Label Printer
is the Printronix T8000 Thermal
Label Printer with native Ethernet/IPDS. Please
click here for additional
information and pricing for the
T8000 Thermal Label Printer.
Overview
The
EBox (Zebra) from CSP GmbH allows a Zebra bar code label printer to be
seen as an IBM AFP/IPDS printer over a TCP/IP
Ethernet LAN. This allows for a hassle-free replacement of IPDS
matrix, line and laser printers with an on-demand label printer from Zebra
technologies.
If you need AFP/IPDS capability for Matrix
Printers, click here.
The IBM Ethernet connection to the AS/400
or iSeries host provides the same full error reporting and printing
control as a Twinax printer.
The EBox accepts standard IPDS commands from the
IBM Host over a TCP/IP Ethernet LAN and converts
them into ZPL II, which is sent to the attached parallel printer.
Administrators or programmers do not need to learn a
new programming language (ZPL), nor is it necessary to modify
the bar code generating IPDS application software/drivers.
The EBox was specifically designed to work with
203 dpi printers. This cuts down on the overall cost
of the printing solution while preserving the compatibility with existing
applications targeted at 300 dpi printers. A
particular benefit is the EBox?s support of two-dimensional bar code
symbologies such as Maxicode, Data Matrix, and PDF 417.
Click
here to receive more information about the EBox for IPDS Printing over
TCP/IP
EBOX Specifications |
eBox - Matrix Printer |
EBox
-
Zebra Printers |
Ethernet
Port: |
10BaseT,
100BaseT (auto-sensing) |
same |
Supported
Protocols: AS/400: |
TCP/IP (PPR/PPD, requires PSF/400) |
same |
LAN (Unix, Novell,
Windows): |
TCP/IP
(LPR/LPD), IPX/SPX, NetBIOS w/IP |
same |
Printer
Port: |
Centronics
parallel (IEEE 1284) |
same |
Supported Printers: |
Line
and dot-matrix printers (9, 18, or 24 pin) with IBM ProPrinter or
Epson Emulation and a special set up selection for the IBM 4247
printer. |
203 dpi Zebra
printers with ZPL II emulation |
OS/400
Compatibility: |
V3R1
or later |
V3R7
or later |
IPDS
Emulation: |
IBM
4224 |
IBM 4312, 4028,
3812-2 |
IPDS
Compatibility: |
All
towers supported (except vector graphics and downloaded &
scalable fonts that cannot be processed properly by the attached
printer) |
Push button front
panel with two-line, 16 character/line LCD display or Internet
Browser (after an IP address has been assigned using front
panel) |
Configuration: |
Push
button front panel with two-line, 16 character/line LCD display or
Internet Browser (after an IP address has been assigned using
front panel) |
same |
Physical
Details: |
Size:
6.6"x3.8"x1.4" Wt.:1.4 lbs. Power: 12 VDC 800ma
wall power supply |
same |
Click
here to receive more information about the EBox for IPDS Printing over
TCP/IP
|